Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

Investigate the effects of magnetic fields on the penetration ability of a shaped charge jet at different standoffs

The influence of a magnetic field on the stability of a shaped charge jet is experimentally investigated at standoffs of 490, 650 and 800 mm. The experimental results without and with the magnetic field are compared in terms of the shaped charge jet form, stability and penetration ability. A theoretical model based on one-dimension fluid dynamics is then developed to assess the depth of penetration of the shaped charge at those three standoffs and magnetic conditions. The results show that the penetration capability can be enhanced in more than 70% by the magnetic field. The theoretical calculations are compared with the experimental results with reasonably good correlation. In addition, the parameters introduced in the theory are discussed together with the experiments at three standoffs studied.     

Optimization and mediated bartering models for ground delay programs

The Federal Aviation Administration (FAA) and the airline community within the United States have adopted a new paradigm for air traffic flow management, called Collaborative Decision Making (CDM). A principal goal of CDM is shared decision‐making responsibility between the FAA and airlines, so as to increase airline control over decisions that involve economic tradeoffs. So far, CDM has primarily led to enhancements in the implementation of Ground Delay Programs, by changing procedures for allocating slots to airlines and exchanging slots between airlines. In this paper, we discuss how these procedures may be formalized through appropriately defined optimization models. In addition, we describe how inter‐airline slot exchanges may be viewed as a bartering process, in which each “round” of bartering requires the solution of an optimization problem. We compare the resulting optimization problem with the current procedure for exchanging slots and discuss possibilities for increased decision‐making capabilities by the airlines. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

基于MSP430单片机的海浪水压场自动测量系统

提出了基于MSP430单片机的水压场自动测量系统的设计方案和实现方法并进行了实际测量.解决了自动测量系统中的低噪声、低功耗、高分辨率、大容量存储等关键技术.实验结果表明:该系统具有自动运行、电池供电、记录时间长等特点.适于高海况条件下的海浪水压场的测量.     

架构和模式在水声信息流仿真软件中的应用

水声信息流仿真软件系统涉及多目标、多声纳以及多变的海洋环境.仿真软件的复用性是现代软件工程的重要性能指标.针对系统开放性的特点,在领域分析模型的基础上,采用了面向对象方法设计仿真软件模型.为了满足软件多层次复用的需求,应用软件架构技术和设计模式设计仿真软件.根据水声信息流仿真软件需求,系统划分为四层结构;按功能,层又可分解为包.可复用的设计模式用于设计不同层和包中类之间的关系.提出的仿真软件模型具有良好的可扩充性与可复用性.     

土体泊松比对压入管桩单桩挤土位移场的影响

基于ABAQUS有限元软件,采用主从接触算法模拟桩-土相互作用、修正剑桥模型作为土体本构模型,通过在桩顶施加竖向位移荷载以及合适的网格划分技术建立了较为符合压入管桩压桩实际的有限元模型。利用得到的有限元模型模拟了压入管桩压桩产生的挤土位移场,对不同泊松比时压入管桩单桩挤土位移场进行了对比分析。结果表明:不同泊松比时竖向和水平挤土位移场沿深度方向和径向的分布规律趋于一致;土体泊松比的变化会对压入管桩压桩产生的竖向和水平挤土位移场产生较大影响;泊松比越大,压桩产生的竖向和水平挤土位移越大。     

内编队地球重力场测量性能数值分析

内编队系统通过实现内卫星纯引力轨道环境和内卫星精密定轨,完成高精度地球重力场测量,实现了不依赖于加速度计的重力卫星实施新途径。针对内编队重力场测量性能难以解析分析的情况,基于MATLAB并行程序设计进行了重力场测量数值模拟,获得了内编队重力场测量的有效阶数及其精度。在内编队轨道高度为300km、内卫星干扰力为1.0×10-10m/s2、外卫星定轨精度为3cm、内外卫星相对状态测量精度为1mm的条件下,计算得到内编队测量重力场的有效阶数为72,相应的大地水准面累积误差为44cm,重力异常累积误差为4.5mGal,由此可知内编队测量重力场的有效阶数主要分布在低阶部分。     

失去润滑条件下弧齿锥齿轮传动系统瞬态温度场Simulink仿真分析

根据传热学理论和热网络法,以某型直升机尾减速器弧齿锥齿轮传动系统为研究对象,建立了其温度场Simulink仿真计算模型。基于该模型,计算获得该传动系统正常润滑条件下的稳态温度场,并以它作为初始条件计算分析该传动系统失去润滑条件下的瞬态温度场,为预测该弧齿锥齿轮传动系统在失去润滑条件下的干运转生存能力提供理论依据。     

业务流程建模中流程校验的研究与实现

随着计算机网络技术的迅速发展,企业的信息化程度不断提高,以自动化流程为核心理念的工作流管理系统应用越来越普及,对工作流管理系统的可靠性和正确性要求也越来越高.提出了一种工作流建模时的验证方法:在工作流管理系统的工作流建模环境中加入流程验证模块,对建模过程中可能产生的错误进行验证,进而建立简洁实用的流程;通过分析流程中的异常和失败的类型,增强系统的纠错能力,减少引擎处理的压力;对有着特殊应用的建模过程,能够方便地添加自定义的验证条件,为流程的正确运行提供有效的保障;向基于规则化的工作流系统提供建模完整性的方案,获得系统工作流的稳健性.     

基于信息流的中枢疲劳脑电分析

为充分利用多导脑电信息,首次提出运用有向传递函数（DTF）方法,对不同中枢疲劳状态下导联间信息流的强度和方向的变化进行分析。研究结果表明,脑电功能耦合中额一到一顶方向的信息流是大脑皮层联系的一个固有特征,可以有效地刻画安静清醒和疲劳两个状态,长时间脑力劳动任务引起中枢疲劳的增加,进而导致整个频率段占优势的信息流的方向发生了反转,信息流占优势的方向从实验前的顶一到一额方向,转变为实验后的额一到一顶方向。